|Certificate of Constancy of Performance:||1322-CPR-65797/01|
certified according to EN 1634-1
|Class:||EW30 – EW90|
only 1.43 kW / m2 after 90 minutes
BEST IN CLASS!
|Optional smoke protection:||Sa or S200|
|Closing cycles:||C - C2 depending on model (e.g. size, weight)|
Standard system sizes up to 12 x 7 metres (max. 60 m2). Larger dimensions possible as special systems!
Optionally available with standard end strip (galvanised sheet steel) or with flexible end strip.
Benefit from our innovative, ball bearing mounted guide rails, which ensure reliable and low-wear closing and opening even in a draught.
The system can also be optionally factory-equipped with smoke protection according to DIN 18095-3 / EN 1634-3 or existing systems can also be upgraded.
In addition to the standard model, the flexible fabric fire protection closure can be used as a floor-closing variation even at an elevated installation position, on façades (interior or exterior), horizontally (product type TFF-H), and throughout track-bound conveyor systems.
Exterior systems are equipped with a special housing cover. No heating lines are required during winter use. Execution is possible for single windows as well as for multiple windows next to or/and on top each other.
When opened, the textile is located on a winding shaft in an enclosure made of galvanised sheet steel above the opening to be closed.
The winding shaft is held in the opened position by a magnetic clamp integrated in the tubular motor. The system closes in a speed-controlled manner under its own weight according to the gravity fail safe principle by means of an end rail. The closing speed is approx. 10 - 15 cm per second.
Wiring with functional integrity is not required due to the gravity fail safe principle.
Motor controllers, additional accessory components, as well as installation variations can be found in the section Control units.